Home > Selling Leads > Industrial Supplies > Hardware & Tools

Hardware & Tools

slurry knife gate valve

slurry knife gate valve

  YIMOU VALVES 1. Nominal Pressure:0.6MPa,1.0MPa 2. Nominal Diameter:D50 ~ DN600 (2" ~ 24") 3. Flange Drilled:150lb,JIS 10K,TABLE D etc. 4. Body Materials: ductile iron 5. Sleeves:Natural Rubber
LUG KNIFE GATE VALVE

LUG KNIFE GATE VALVE

  YIMOU VALVES 1. Nominal Pressure:0.6MPa,1.0MPa 2. Nominal Diameter:D50 ~ DN600 (2" ~ 24") 3. Flange Drilled:150lb,JIS 10K,TABLE D etc. 4. Body Materials: ductile iron , carbon steel, stainless steel
300LB KNIFE GATE VALVE

300LB KNIFE GATE VALVE

  YIMOU VALVES 1. Nominal Pressure:0.6MPa,1.0MPa,1.6MPa,2.5MPa,4.0MPa,6.4Mpa(150LB,300LB) 2. Nominal Diameter:DN50 ~ DN 4 00 (2" ~ 16 ") 3. Flange Drilled:ANSI,JIS,BS,AS,DIN etc. 4. Body Materials: Carbon Steel,Stainless Steel 5. Seal:Metal,Rubber,
second hand forging press

second hand forging press

2000 ton second hand open die forging press (second hand but not used after commission)
115/125mm *1100w Angle grinder

115/125mm *1100w Angle grinder

  Specification: Dia. Of Wheel:115/125mm Rated Voltage: 230-240V Rated Frequency: 50Hz  Rate Input Power:1100w No-load Speed: 12000min -1 Height/width ??? φ56 × L58 Packing Size/pcs(115mm): 41 × 34 × 25CM /6PCS Packing Size/pcs(125mm): 44 × 34 × 26CM /6PCS...
Join free